System Size and Weight-
F120: 889 x 870 x 721 mm (35 x 35 x 29 in.), 124 kg (275 lbs) F170, F270, F370: 1,626 x 864 x 711 mm (64 x 34 x 28 in.), 227 kg (500 lbs) with consumables Noise Specification 46 dB maximum during build, 35 dB when idle
Accuracy1
Parts are produced within an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in), whichever is greater.
Material Delivery Options -
Stratasys F120: 2 material coil boxes, 1 for model, 1 for support located external to printer Stratasys F170: 2 material spool bays, 1 for model, 1 for support located in a drawer on the front of the unit Stratasys F270/F370: 4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit
Network Connectivity-
Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector Wireless-ready: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP Encryption: CCMP, TKIP
Software -
GrabCAD Print (download): Stratasys F120, F170, F270 and F370 Insight software license: Stratasys F370 only
System Requirements -
Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Operating Environment -
Operating: Temperature: 15 – 30 ºC (59 – 86 ºF), Humidity: 30 – 70% RH Storage: Temperature: 0 – 35 ºC (32 – 95 ºF), Humidity: 20 – 90% RH Power Requirements 100–132V/15A or 200–240V/7A. 50/60 Hz
Regulatory Compliance -
CE (low-voltage and EMC directive), FCC, EAC, cTUVus, FCC, KC, RoHs, WEEE, Reach
